Table of Contents
Advertisement
Printer Status
3. Touching one of these icons on the screen will open that head's Head Details page. The
same temperature information is displayed within this page for both the model and support
heads.
Software Version
Version information for the software used to control the printer (Controller Software) can be
accessed via the Maintenance page:
1. To access the Maintenance page, press the Maintenance button within the Tools page
(see
2. Locate the Update Software row within the page (see
3. The printer's Controller Software version information is displayed within the Update
Software row.
Figure 33: Materials Page Head Temperatures
Controller Software is installed on a flash device located on the Controller board and
should not be confused with GrabCAD Print software, which is installed on the
workstation PC.
"Working with the Tools Page" (page
Figure 34: Controller Software Version Information
© Copyright 2020 Stratasys. All rights reserved.
69)).
"Maintenance" (page
Software Version
83)).
Page 128
Advertisement
Table of Contents
