Table of Contents
Advertisement
Warnings and Errors
Active model spool removed
•
Indicates that the printer lost contact with the model material coil box's memory chip.
•
Correct condition - ensure that the filament key is seated correctly within its filament port. If
so, disconnect and then reconnect the material coil box (see
(page 105)
correct the error, disconnect the current material coil box and connect a new one.
Active support spool removed
•
Indicates that the printer lost contact with the support material coil box's memory chip.
•
Correct condition - ensure that the filament key is seated correctly within its filament port. If
so, disconnect and then reconnect the material coil box (see
(page 105)
correct the error, disconnect the current material coil box and connect a new one.
and
"Connecting Material Coil Box To Printer" (page
and
"Connecting Material Coil Box To Printer" (page
© Copyright 2020 Stratasys. All rights reserved.
Build Pause Warnings
"Unloading Material"
98)). If this does not
"Unloading Material"
98)). If this does not
Page 199
Advertisement
Table of Contents
