Table of Contents
Advertisement
Basic Job Build Tasks
•
While the printer is building, various pause and abort related warnings may be displayed.
Some of these warnings may be due to a manual pause or abort, while others may be the
result of the printer automatically pausing or aborting a build. Depending on the severity of
the warning you may or may not be able to resume building.
See
"Warnings and Errors" (page 192)
and instructions on how to correct them.
Pausing a Build
During a build the Pause button within the Build page becomes selectable (see
(page 45)
button:
•
An automatic pause occurs when a material coil box runs out of material, a failure is
detected, etc.
•
A manual pause occurs whenever the Pause button is pressed.
When the printer is directed to pause:
1. The current toolpath is completed, the Z stage is lowered slightly, and then the head
assembly is parked. "PAUSED" is displayed within the Build Status Display (see
If an automatic pause occurs, text will be displayed within the Notifications Display portion
of the Build Page. Touching the text on the screen will open a dialog indicating the reason
for the pause condition (i.e. empty material coil box). Correct this condition and then press
the Close button to exit the dialog. (See
pause related warnings/errors and resolution instructions.)
for details). The printer can pause automatically, or be manually paused using this
© Copyright 2020 Stratasys. All rights reserved.
for a detailed list of the warnings you may encounter,
"Build Pause Warnings" (page 198)
Pausing a Build
"Pause Button"
Figure
20).
for a list of
Page 115
Advertisement
Table of Contents
