Table of Contents
Advertisement
Tip Calibration
Support toolpath is most centered between the alignment
indicators at the 4, indicating an adjustment of X1 = 0.004
Support
toolpath,
most
centered
at 4
c. Within the Manual Tip Calibration page, slide all four of the scale icons on the screen to
Not
centered
at 0
Alignment
indicators
match where the support toolpath is most centered between the alignment indicators.
The Delta X and Delta Y fields will change to reflect adjustments made.
One offset value must be selected for each side (X1, X2, Y1, and Y2).
© Copyright 2020 Stratasys. All rights reserved.
Figure 12: Calibration Part
Calibration Part
Manual Tip Calibration
Page 136
Advertisement
Table of Contents
