Table of Contents
Advertisement
Overview
4 USER INTERFACE
This chapter provides an overview of the F120 printer's User Interface (UI). Specific printer
operation information and procedures can be found in
(page
95). You must power ON the printer prior to using the touchscreen, see
the Printer" (page 95)
Overview
The User Interface is composed of a touchscreen located on the front right face of the printer
(see
Figure
are highlighted in
Navigation
Menu
The touchscreen is designed to reduce glare; therefore, it is best to view the touchscreen when
standing in front of the printer with the screen to your right. Viewing the touchscreen from any
other angle may inhibit a clear view of the screen's display. The touchscreen is easy to use and
allows you to:
•
Access material load, unload, and calibration functions.
•
Monitor printer status.
•
Monitor material/head statuses (types loaded/installed, material coil box volumes, head
odometers, etc.) and change materials and/or heads when necessary.
•
Monitor build progress (name of job being built, materials usage information, estimated
completion time, etc.).
•
Access network configuration information and change printer defaults.
•
Access the Job Queue and Sample Queue (internal storage).
for instructions.
1). Each page of the UI is composed of two main areas of functionality; these items
Figure
1.
Figure 1: User Interface Overview
© Copyright 2020 Stratasys. All rights reserved.
Chapter , 5 Operating the Printer
"Powering ON
Display
Area
Page 34
Advertisement
Table of Contents
