Customer Replaceable Units
4. Pivot and remove the inside door panel from the door assembly. Gently press on the pivot
arms to disengage them from the door assembly. See
Pivot arm (2)
5. Disconnect the door latch assembly solenoid cable connector.
6. Disconnect the door latch assembly sensor cable connectors (2).
7. Using a 4 mm socket wrench, remove the door latch assembly mounting nuts (2). See
Figure
8. Remove the door latch assembly from the oven door. See
Figure 40: Inside door panel mounting screw locations
41.
Figure 41: Door latch assembly mounting nut locations
© Copyright 2020 Stratasys. All rights reserved.
Oven Door Latch
Figure
40.
Inside
door panel
Figure
41.
Page 187