Table of Contents
Advertisement
Customer Replaceable Units
4. From inside the front of the gantry, use a 3mm hex wrench to remove the screws (2) that
secure the door box to the oven frame.
5. While supporting the door box, use a 3mm hex wrench to remove the oven light mounting
screws (2) and the retaining bracket. See
6. Move the oven light out a small distance to access the oven light cable connector.
Note:
The door box contains cables for the oven door and camera. Gently lift and support
the door box to access the oven light mounting screws underneath.
Figure 35: Door box mounting screw locations
© Copyright 2020 Stratasys. All rights reserved.
Figure 36 (page
183).
Oven Light
Door Box
Page 182
Advertisement
Table of Contents
