Table of Contents
Advertisement
Printer Status
3. Touching one of these icons on the screen will open that material's Material Details page
(see
Icons and filament pathways will take on a variety of colors and highlighted states,
depending on their status (see
pertains to both model and support Material Status Icons:
•
•
•
•
"Viewing Material Details" (page
Figure 31: Materials Status Locations
Blue border - indicates that a valid material coil box is connected to the corresponding
material slot, the blue filament pathway indicates that material from the box is loaded to
the head and is selected to be used for building.
Gray (dashed border) - an icon that is blank in the center with a gray dashed border
and gray dashed filament pathway indicates that a material coil box is not connected to
the printer.
Yellow - an icon with yellow coloring indicates an issue/warning (see
Errors" (page 192)
for more information).
•
A volume of 0% accompanied by solid yellow coloring indicates an empty material
coil box.
Red - an icon with red coloring indicates an error (see
(page 192)
for more information).
•
A red border with a notification badge in the center of the icon indicates that the
material coil box is invalid (i.e. not licensed or not compatible with the associated
head type).
•
A red border with a notification badge within the center of the filament pathway
indicates a load related error.
•
A semi-solid red icon indicates that an error occurred when checking the data on
the material coil box's memory chip and the box is unusable.
•
A solid red icon indicates that communication with the material coil box is not
possible.
© Copyright 2020 Stratasys. All rights reserved.
62)).
Table 7 (page 61)
for detailed status explanations). Coloring
Materials Status
"Warnings and
"Warnings and Errors"
Page 126
Advertisement
Table of Contents
