Exporting System Configuration (.CFG) File
GrabCAD Print Method
To update Controller Software via GrabCAD Print, navigate to
196-printer-firmware-management
firmware".
Exporting System Configuration (.CFG) File
If your system is receiving fault determination codes, you may need to export a configuration
(.cfg) file from your system to send to Customer Support. System configuration files can be
exported using one of the following three methods:
•
Saving to a USB Flash drive directly from the F120 printer
•
Saving to a location on your workstation PC
•
Saving via GrabCAD Print
You have the option of exporting system configuration files via any of these methods; however,
the USB Flash drive method is the preferred method.
USB Flash Drive Method
1. Insert the USB flash drive into one of the available USB ports on the F120 printer.
2. On the printer touchscreen, open the Tools page by pressing the Tools button within the
Navigation Menu.
Tools
button
3. Open the Maintenance page by pressing the Maintenance button within the Tools page.
and follow the procedure for "Updating the printer's
Figure 6: Tools Page
© Copyright 2020 Stratasys. All rights reserved.
GrabCAD Print Method
http://help.grabcad.com/article/
Maintenance
button
Page 149