Table of Contents
Advertisement
Warnings and Errors
•
Correct condition - unload model and support material (see
(page
loaded, verify that material purges from the tips by performing a manual purge of each tip
using the purge buttons within the Tip Maintenance page (see
(page
Resource not available
•
Indicates that the printer is in the process of completing another task and a load/unload
cannot be started until the task is complete.
•
Correct condition - wait a couple of minutes and then attempt to load/unload material.
Task already running
•
Indicates that the printer is in the process of loading or unloading material. Only one
material coil box can be loaded or unloaded at a time.
•
Correct condition - wait until the load/unload in process is complete before attempting to
load material to or unload material.
105)) and then reload these materials (see
58)).
© Copyright 2020 Stratasys. All rights reserved.
Load/Unload Errors
"Unloading Material"
"Loading Material" (page
"Head Maintenance"
97)). Once
Page 197
Advertisement
Table of Contents
