Table of Contents
Advertisement
Warnings and Errors
Head Warnings
Not initialized
•
Indicates that head data is not ready. This is only displayed when the printer is initializing a
newly installed head, or if the initialization process failed.
•
Correct condition - wait at least 60 seconds after the error is first displayed. If the error
persists, open the top cover and unclip the head cable connected to the corresponding
head. Wait a few seconds and then reconnect the head cable to the head and close the top
cover (see
problem with either the head or the head cable; please contact Stratasys Customer
Support or your regional Stratasys office for further assistance (see
(page 192)
Order new model head
•
Indicates that the model head is near its odometer limit. This warning is displayed as a
reminder to order a replacement head for the one that is approaching its odometer limit.
Build hours are available within the head's Head Details page (see
(page
•
Correct condition - you are still able to build using this head, but part quality may be
affected. Once the head's odometer limit is reached, you will be prompted to change the
head (see
Order new support head
•
Indicates that the support head is near its odometer limit. This warning is displayed as a
reminder to order a replacement head for the one that is approaching its odometer limit.
Build hours are available within the head's Head Details page (see
(page
•
Correct condition - you are still able to build using this head, but part quality may be
affected. Once the head's odometer limit is reached, you will be prompted to change the
head (see
Head Errors
Replace model head
•
Indicates that the model head has reached its build hour odometer limit. This error
message is displayed as a reminder that you should replace the head before starting
another build. Build hours are available within the head's Head Details page (see
Head Details" (page
•
Correct condition - you are able to continue building using this head but it is recommended
that you change the head prior to starting a new build (see
(page
"Head Replacement" (page 108)
for contact information).
57)).
"Head Replacement" (page
57)).
"Head Replacement" (page
57)).
108)).
© Copyright 2020 Stratasys. All rights reserved.
for details). If the error persists there is likely a
108)).
108)).
"Head Replacement"
Head Warnings
"Getting Help"
"Viewing Head Details"
"Viewing Head Details"
"Viewing
Page 203
Advertisement
Table of Contents
