Warnings and Errors
Model head removed
•
Indicates that the printer lost contact with the model head.
•
Correct condition - ensure that the head is seated correctly within the gantry. If so, remove
the head and then reinstall it (see
the error, remove the head and install a new head.
Support head removed
•
Indicates that the printer lost contact with the support head.
•
Correct condition - ensure that the head is seated correctly within the gantry. If so, remove
the head and then reinstall it (see
the error, remove the head and install a new head.
"Head Replacement" (page
"Head Replacement" (page
© Copyright 2020 Stratasys. All rights reserved.
Build Pause Warnings
108)). If this does not correct
108)). If this does not correct
Page 200