Table of Contents
Advertisement
Tip Calibration
2. Open the Tip Calibration page by navigating to Tools > Calibration > Tip Calibration.
A page similar to
3. Press the Start button for the Automatic Tip Calibration option.
4. The printer will perform an Automatic Tip Calibration. This process includes heating up or
cooling down the oven to reach the required calibration temperature. Completion times will
vary depending on the material used and the initial chamber temperature. The status and
time remaining will continually update on the screen.
Figure 4
will be displayed.
Figure 4: Automatic Tip Calibration Option
Figure 5: Calibrating Tip Offsets
© Copyright 2020 Stratasys. All rights reserved.
Automatic Tip Calibration
Page 131
Advertisement
Table of Contents
