Table of Contents
Advertisement
Working with the Materials Page
Heat/Cool
Depending on the state of the printer, either the Heat or Cool button will be displayed. Pressing
the Heat button instructs the printer to heat the corresponding tip to 270°C for no longer than 2
minutes; the button will toggle to display the Cool button. Pressing the Cool button will instruct
the printer to begin cooling the corresponding tip back to the 0 set point; the button will toggle
to display the Heat button. The tip will also begin to cool automatically if the heat option
exceeds the 2 minute time allotment and the Cool button is not pressed.
Material Status Icons
The Material Status Icons within the Materials page represent the model and support material
coil boxes loaded in the printer. Either two icons will be displayed. Each icon displays a number
corresponding to the material coil box, colored bars indicating the color of the material currently
installed, the name of the material currently installed, and a percentage indicating the current
volume of material on that material coil box. Touching one of these icons on the screen, unless
otherwise indicated in
Figure 28: Head Maintenance Page - Menu View
Table
7, will open that material's Material Details page. Various graphics
© Copyright 2020 Stratasys. All rights reserved.
Material Status Icons
Page 60
Advertisement
Table of Contents
