Table of Contents
Advertisement
Unloading Material
3. Observe the status information displayed for each of the Materials Status Icons. For a
loaded material, the pathway between the material's Material Status Icon and
corresponding Head Status Icon will be solid blue, the Head Status Icon will be blue, and
the Material Status Icon will display a solid blue border.
4. Open the Material Details page corresponding to the material you want to unload by
touching its Material Status Icon on the screen.
5. Press the Unload button within the Material Details page.
6. The F120 unload material wizard initializes and material begins to unload from the head.
The unload process will take several minutes; please be patient.
•
•
7. When the material is unloaded from the head and the F120 material unload wizard has
completed its process. See
•
Figure 12: Current Configuration - Unload Material
Only one material can be unloaded at a time.
The pathway displayed between the Material Status Icon and the corresponding Head
Status Icon becomes highlighted to indicate unload progress (see
Figure 31 (page
67)).
The Head Status Icon will refresh and become solid gray, indicating that material is no
longer loaded to the head.
Remove the filament key from the material port.
© Copyright 2020 Stratasys. All rights reserved.
Figure 13: Unload Button
Figure 15 (page
107).
Connecting Material Coil Box To Printer
Page 106
Advertisement
Table of Contents
