Table of Contents
Advertisement
Working with the Tools Page
See the detailed information in the sections below for specific information on the available
connection types.
If the Wired connection type is selected, the Network Mode row will be displayed (see
Figure 77 (page 89)
between a Static or Dynamic network mode; Dynamic is selected by default. Use the Static
and Dynamic radio buttons to select a network mode. After selecting a network mode press
the Back button to exit and return to the Network page; the selected network mode will be
indicated within the Connection Type row.
If the Wireless connection type is selected, the Available Networks row will be displayed (see
Figure 78 (page 89)
allowing you to scan for and connect to an available Wi-Fi network. After selecting an available
Figure 77: Network Page - Network Mode Row
Figure 78: Network Page - Available Networks Row
as a reference). Pressing anywhere within this row will allow you to select
Figure 79: Select Wired Network Mode
as a reference). Pressing anywhere within this row will open a page
© Copyright 2020 Stratasys. All rights reserved.
Network
Page 89
Advertisement
Table of Contents
