Table of Contents
Advertisement
Working with the Tools Page
Maintenance
From this page you can perform a variety of maintenance procedures on the printer, and view
diagnostic/printer state information. Please note that advanced maintenance must be
performed by an authorized service representative only.
To access the Maintenance page, press the Maintenance button within the Tools page; a
screen similar to the following will be displayed.
Gantry/Stage
Position information for the X, Y and Z axes is displayed within the Gantry/Stage row. Pressing
anywhere within the Gantry/Stage row will open the Gantry/Stage page.
The single directional arrow button within the Gantry: section allows you to move the head in
the X and Y axis. Pressing the Front Arrow button moves the head assembly to the front of the
gantry.
This section provides an overview of the Maintenance page and its features, but
does not go into detail regarding printer maintenance procedures. See
Maintenance (page 146)
© Copyright 2020 Stratasys. All rights reserved.
for detailed maintenance information.
Figure 64: Maintenance Page
Figure 65: X, Y, Z Position
Maintenance
Chapter , 7
Page 83
Advertisement
Table of Contents
