Table of Contents
Advertisement
Basic User Operations
6. After the initialization and start up process is complete, the touchscreen will refresh to
display the Build page and the printer will automatically perform an XY Gantry Calibration
(see
Powering OFF the Printer
To power the printer OFF:
1. Ensure that the printer is stopped (idle) and is not building.
2. Press the power button located on the front of the printer (see
3. A dialog will be displayed asking you to confirm the power OFF; press Yes to power OFF.
"XY Gantry Calibration" (page 143)
Figure 4: Power OFF Confirmation
© Copyright 2020 Stratasys. All rights reserved.
for details).
Figure 3: Build Page
Powering OFF the Printer
Figure 1
for button location).
Page 96
Advertisement
Table of Contents
