Cutting Unit Suspension Crossarm Assembly - Toro Greensmaster eTriFlex 3360 Service Manual

Cutting Unit Suspension Crossarm Assembly

g281280
1. Crossarm
2. Flange bushing (8 each)
3. Link (4 each)
4. Lock nut (4 each)
5. LH crossarm mount
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
6. RH crossarm mount
7. Pivot pin (2 each)
8. Lever (2 each)
9. Spring (2 each)
10. Pivot pin (2 each)
Three (3) identical cutting unit suspension assemblies are used on Greensmaster
eTriFlex machines. The cutting unit attaches to the crossarm assembly which is
attached to the front of the cutting unit suspension assembly.
Remove the cutting unit before servicing the crossarm assembly; refer to the
traction unit Operator's Manual.
Figure 146
11.
12.
13.
14.
Page 6–51
Socket head screw (8 each)
Basket horn (2 each)
Flange head screw (4 each)
Suspension steering head
Chassis: Service and Repairs