Toro Greensmaster eTriFlex 3360 Service Manual page 100

Removing the Engine (continued)
g286730
1. Engine frame assembly
2. Cap screw
3. Cap screw ( 2 each)
4. Isolating mount – rear
5. Lock nut (3 each)
Engine (Model 04580): Service and Repairs
Figure 16
6. Cap screw
7. Clamp
8. Lock nut
9. Flange nut (4 each)
10. Wire harness connector
A. Disconnect the starter/generator from the machine wire harness. Check
the starter/generator and the harness connector for damage or corrosion
and clean or repair as necessary.
B. Remove the fasteners securing the engine frame assembly to the 3
isolating mounts.
Page 4–14
11. Isolating mount – front (2 each)
12. Cap screw (4 each)
13. Flat washer (3 each)
14. Cap screw (2 each)
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B