Removing and Installing the 12V System Battery (Model 04580) (continued)
Electrical System: Batteries (Model 04580)
Be careful when removing the battery cables and ensure that you do
not damage the terminal posts or cable connectors.
1. Remove the right side cover.
2. Remove the battery cover.
3. Disconnect the ground (-) cable from the battery terminal, then disconnect
the positive (+) cable from the battery terminal.
4. Remove the lock nuts, carriage bolts, and the battery clamp.
5. Install the battery in reverse order.
6. Tighten the battery terminal fasteners from 3.8 to 4.1 N·m (34 to 37 in-lb),
then apply battery terminal protector Toro Part No. 107-0392 or a light layer
of grease to the battery terminals and cable connectors to reduce corrosion.
IMPORTANT
Page 5–106
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B