Toro Greensmaster eTriFlex 3360 Service Manual page 236

Removing and Installing the Front Traction Motor (continued)
Electrical System: Service and Repairs
4. Remove the cotter pin and clevis pin securing the brake linkage to the brake
lever. Discard the cotter pin.
5. Remove the extension spring from the brake lever.
6. Remove the brake lever from the taction motor assembly.
7. Remove the fasteners securing the arm (item 3) to the frame and the traction
motor and remove the arm.
8. Remove the support link.
9. Remove the 4 fasteners securing the traction motor to the frame and remove
the traction motor.
10. Install the traction motor assembly in the reverse order.
11. Calibrate the traction motors before returning the machine to service; refer to
Calibrating the Front Traction Motors (page
Page 5–132
5–56).
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B