Gauge Bar Assembly (continued)
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
Toro Part No. 94–9010
Use the gauge bar to verify
height-of-cut adjustment.
Cutting Reel Shim
Toro Part No. 125–5611
Use the 0.05 mm (0.002 in) shim
like a feeler gauge to measure
the gap between the reel and the
bedknife during reel adjustment.
Cutting Performance Paper
Toro Part No. 125–5610 (300
strips)
Cutting performance paper is used
to test the cutting reel performance
after adjusting the reel to bedknife
clearance.
Reel Drive Shaft
K-Line Part No. TOR4112
Use the drive shaft for rotating the
reel during cutting unit adjustment
or any time the cutting unit motor is
removed.
Reel Thread Repair Taps
15/16–16 Right-Hand Thread –
Toro Part No. 137–0926
15/16–16 Left-Hand Thread – Toro
Part No. 137–0927
Use to clean or repair the internal
threads of cutting unit reels.
Page 2–15
Specifications and Maintenance: Special Tools