Toro Greensmaster eTriFlex 3360 Service Manual page 33

Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
Bedknife Screw Tool
K-Line Part No. TOR510880A
This screwdriver-type bit is made to
fit Toro bedknife attaching screws.
Use this bit with a torque wrench to
secure the bedknife to the bedbar.
IMPORTANT
Important: To prevent
damage to the bedbar,
DO NOT use an air or
manual impact wrench
with this tool.
Diameter/Circumference Measuring Tape
K-Line Part No. TOR6023
Spring steel measuring tape
for accurately measuring the
circumference and outside diameter
of cutting reel and other spherical
components. Tape calibration
is in fixed inch readings (no
adjustments).
Roller Rebuilding Tools
The following combination of
washers and spacers can be used
to install bearings and seals into
the front and rear rollers (2 each
required).
Bearing installation washer:
107-8133 (black)
Seal installation spacer: 107-3505
Seal installation washer: 104-6126
(yellow)
K-Line Part No. TOR4105
As an alternative to using the
washers and spacer listed above,
this special tool set can be used to
install bearings and seals into the
front and rear rollers.
Page 2–17 Specifications and Maintenance: Special Tools