Toro Greensmaster eTriFlex 3360 Service Manual page 34

Specifications and Maintenance: Special Tools
Turf Evaluator Tool
Toro Part No. 04399
Many turf discrepancies are subtle
and require closer examination. In
these instances, the Turf Evaluator
grass viewing tool is helpful. It can
assist turf managers and service
technicians in determining causes
for poor reel mower performance
and in comparing the effective
height-of-cut of one mowed surface
to another. This tool should be used
with the Toro Guide to Evaluation
Reel Mower Performance and
Using the Turf Evaluator (Toro part
no. 97931SL) available from an
local authorized Toro Distributor.
Cutting Unit Motor Rotor Tool
K-Line Part No. TOR6028
The cutting unit motor rotor tool is
recommended to remove and install
the rotor from the cutting unit motor
housing. The tool includes the
puller hub, threaded shaft, handle
and four screws.
Drive Shaft Removal Tool
Toro Part No. 137–0920
Use to remove the optional
Universal Groomer drive shaft from
the reel if the drive shaft hex is
damaged.
Adapter Wrench
Toro Part No. 137-0921
Use to hold the optional Universal
Groomer drive shaft securely when
removing or installing the drive
adapter.
Page 2–18 Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B