Toro Greensmaster eTriFlex 3360 Service Manual page 95

Cooling System (continued)
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
The engine and exhaust system may be hot. To avoid possible
burns, allow the engine and exhaust system to cool before working
on the engine.
Never clean engine with pressurized water. Water could enter and
contaminate the fuel system.
2. Carefully clean the area around the cooling fins on both cylinder heads.
3. Clean the screen guard and blower housing of dirt and debris
4. If necessary, remove the screen guard from the blower housing and clean
the rotating screen that is attached to the flywheel.
5. If necessary, remove the blower housing from the engine for complete
cooling system cleaning.
Never operate engine without the blower housing installed.
Overheating and engine damage may result.
6. Make sure rotating screen, blower housing and screen guard are reinstalled
to the engine if removed.
7. Clean any debris from the screens and air ducts in the hood.
CAUTION
IMPORTANT
IMPORTANT
Page 4–9 Engine (Model 04580): Service and Repairs