Removing and Installing the Control Console (continued)
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
Check the InfoCenter, switches, and the harness connectors for damage or
corrosion and clean or repair as necessary.
4. Record the location of any cable ties and disconnect the choke control cable
at the engine. Remove the choke control knob before removing the choke
control.
5. Remove the 2 fasteners securing the console to the support and remove
the console.
6. Install the console and console components in reverse order.
Note: Orient joystick stem toward seat during assembly. Install function
control switch as shown in
Figure
137.
Page 6–39
Chassis: Service and Repairs