Identifying the 48 VDC System Fuses and their Functions (continued)
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
Three fuses are used to protect the 48 VDC cutting unit motors. An additional
fuse is used to protect the optional 48 VDC 3WD (rear) traction motor. These are
Maxi blade fuses located in a covered fuse block under the left side cover.
g287313
1.
35A 58V fuse – T2:Cutting Unit 1 (center) power bus
2.
35A 58V fuse – T3:Cutting Unit 2 (left) power bus
3.
35A 58V fuse – T4:Cutting Unit 3 (right) power bus
4.
35A 58V fuse – T5:Traction 3 (optional 3WD) power bus
Figure 36
(left side cover removed)
Page 5–27
Electrical System: Testing the Electrical Components