Chapter 3: Setup; Adjusting And Installing The Cutting Unit; Installing The Transport Wheels - Toro Greensmaster eFlex 1021 Operator's Manual

Adjusting and Installing the Cutting Unit

Parts Required
1
1
1
1
1. Adjust the cutting unit to your desired settings; refer to the cutting unit Operator's
Manual.
2. Install the spring
to the transmission coupler shaft.
3. Install the cutting unit to the machine.

Installing the Transport Wheels

You can purchase an optional Transport Wheel Kit (Model 04123); contact your authorized
Toro distributor.
1. Ensure that the tires are inflated to 83 to 103 kPa (12 to 15 psi).
2. Move the kickstand to the T
Setup
Cutting unit (order separately; contact your authorized Toro distributor)
Hex tube
Spring
Collar
, collar , and hex tube
RANSPORT
G404684
-W -S position.
HEEL ERVICE
Page 3–1
Chapter 3
Setup
3460-892 A