Toro Greensmaster eTriFlex 3360 Service Manual page 83

Factors That Can Affect Quality of Cut (continued)
Factor
Cutting unit alignment and ground following
Roller type and condition
Cutting unit accessories
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
Possible Problem/Correction
Check cutting unit stabilizer springs and suspension ball joints for
damage, binding condition, or wear. The ball joint base has a slip fit
condition with reference to the suspension, and should be free to
rotate. Repair if necessary.
A variety of cutting unit rollers are available. Refer to the Cutting Unit
Parts Manual for a listing of available accessories, or contact your local
Authorized Toro Distributor for additional information.
Ensure that the rollers rotate freely. Repair the roller bearings if
necessary; refer to Roller Assemblies (page
A variety of cutting unit accessories are available that can be used to
enhance aftercut appearance. Refer to the Cutting Unit Parts Manual
for a listing of available accessories, or contact your local Authorized
Toro Distributor for additional information.
Page 3–47 Troubleshooting: General Operation Problems
7–23).
(Model 04590)