Toro Greensmaster eTriFlex 3360 Service Manual page 296

Installing the Cutting Unit Suspension Assembly (continued)
Chassis: Service and Repairs
g281602
1. Stabilizer spring
2. Spring bracket
Note: To reduce the chance of turf damage when the cutting unit is lowered,
properly adjusted stabilizer springs should square the cutting unit with the
machine as the cutting unit is raised. Adjust the stabilizer springs if necessary.
5. Move the cutting unit motor to its storage location at the front of the
suspension assembly.
6. Fit the cutting unit motor cable into the bracket on the suspension assembly,
and secure the cable with the bulkhead nut.
7. Install the cutting unit; refer to the traction unit Operators Manual.
8. Install the grass basket.
Figure 145
3. Rear of pivot mount
Page 6–50 Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B