Toro Greensmaster eTriFlex 3360 Service Manual page 293

Servicing the Cutting Unit Suspension Assembly
g281479
1. Pivot mount
2. Lower A−arm
3. Ball joint (6 each)
4. Retaining ring (6 each)
5. Striker plate
6. Pop rivet (2 each)
7. Steering stop
8. Flange head screw (5 each)
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
9. Ball joint clamp (6 each)
10. Flange head screw (8 each)
11. Upper A−arm
12. Lift plate
13. Flange head screw (2 each)
14. Cap screw (4 each)
15. Counterbalance tensioner
16. Flange nut (4 each)
The cutting unit suspension assembly can be serviced on or off the machine.
1. Park the machine on a level surface, lower the cutting units, set the key
switch to the O position and remove the key.
FF
2. Remove the grass basket.
3. Remove the cutting unit; refer to the traction unit Operator's Manual.
Figure 143
17.
18.
19.
20.
21.
22.
Page 6–47
Steering head
Grommet
Counterbalance bracket
Counterbalance spring (3 each)
Cotter pin
Clevis pin
Chassis: Service and Repairs