Toro Greensmaster eTriFlex 3360 Service Manual page 220

Removing and Installing the Lithium-Ion Batteries (Model 04590) (continued)
g310864
1. Center battery cover
2. Battery cover clamp (4 each)
3. Battery interface harness
4. Flange head screw (2 each)
Electrical System: Batteries (Model 04590)
5. Lock nut (2 each)
6. Center mounted battery assembly 10.
7. Flange head screw (2 each)
8. Hex nut (4 each)
6. To remove one or more of the center mounted batteries:
A. Remove the hood; refer to
(page 6–43).
B. Remove the center battery cover.
C. Label and disconnect the negative (–) battery cable and negative (–)
wire harness terminal, and the positive (+) battery cable and the positive
(+) wire harness terminal from the SC8: lithium-Ion battery controller
(BMS) negative (–) and positive (+) terminals; refer to connections B
and C in Figure
D. Label and disconnect the battery interface harness connectors from each
of the center mounted batteries and from the lithium-Ion battery controller
(BMS) M-S terminal.
E. Label and disconnect the machine wire harness connector from the
lithium-Ion battery controller (BMS) COM terminal.
Figure 96
11.
Removing and Installing the Hood Assembly
96.
Page 5–116
9. Positive (+) wire harness terminal
Washer (4 each)
Negative (–) wire harness terminal
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B