Toro Greensmaster eTriFlex 3360 Service Manual page 32

Specifications and Maintenance: Special Tools
Backlapping Brush Assembly
Toro Part No. 29–9100
For applying lapping compound to
cutting units while keeping hands a
safe distance from the rotating reel.
Components for the brush assembly
are also available individually.
Brush 36-4310
Handle 29-9080
Handle cap 2410-18
Angle Indicator and Magnetic Mount
Angle Indicator: Toro Part No.
131–6828
Magnetic Mount: Toro Part No.
131–6829
Because the top grind angle on
bedknives is critical for edge
retention, and therefore after− cut
appearance, Toro has developed
these service tools for accurately
measuring the top grind angle on all
bedknives.
Since there can be variations in the
mounting surface of the bedbar, it
is necessary to grind the bedknife
after installing it to the bedbar.
1. Place the angle indicator on the
bottom side of the bedknife with the
digital display facing you as shown.
2. Press the Alt Zero button on the
angle indicator.
3. Remove the angle indicator and
place the magnetic mount on the
edge of the bedknife so the face of
the magnet is flat against the top
angle of the bedknife.
4. Place the angle indicator on
the mount with the digital display
facing you as shown. The angle
displayed on the indicator is the
current bedknife top angle.
1. Bedknife
2. Angle Indicator
1. Angle indicator surface 4.
2. Magnetic mount
3. Bedknife
Page 2–16
g223327
Figure 7
3. Bedbar
g223326
Figure 8
Bedbar
5. Angle indicator
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B