Table of Contents
Advertisement
Detecting and Managing Faults
When a SPARC T7 server encounters a fault, the fault is recorded in a common fault database.
The fault is then reported by the server in one of several ways, depending on the type and
severity of the fault.
These topics explain how to use various diagnostic tools to monitor server status and
troubleshoot faults in the server.
Step
Description
1.
Check the server for detected faults and for
information about components that might require
service.
2.
Perform additional troubleshooting if needed.
3.
Manage faults following a service procedure.
4.
Contact technical support if the problem persists.
Related Information
"Identifying Components" on page 13
■
"Preparing for Service" on page 41
■
"Returning the Server to Operation" on page 173
■
Checking for Faults
Use these tools to identify components that require service.
Step
1.
Description
Run the fmadm faulty command to
display information about components
that require service.
Links
"Checking for Faults" on page 23
"Interpreting LEDs" on page 29
"Performing Advanced Troubleshooting" on page 34
"Clear a Fault Manually" on page 39
https://support.oracle.com
Links
"Log In to Oracle ILOM (Service)" on page 24
"Identify Faulted Components" on page 24
Detecting and Managing Faults
23
Advertisement
Table of Contents
