Avaya G700 Installation And Upgrades page 189

5 Upgrading an Existing G700 with an S8300 (Primary Controller or Local Survivable Processor):
To check or change proxy settings:
Open your Internet browser.
1.
2. Verify that you have a direct connection with no proxies as follows:
• Internet Explorer
a . Select Tools > Internet Options .
b . Click the Connections tab.
c . Click the LAN Settings button.
d . Deselect proxy server if selected, and click OK .
e . Click OK again to close the Internet Options dialog box.
• Netscape
a . Select Edit > Preferences .
b . Under Category, click Advanced .
c . Click Proxies .
d . Make sure Direct connection to the Internet is selected.
e . Click OK .
If there is a proxy server you normally use with your Internet browser, you can automatically exclude proxy
servers are when you are directly connected to the S8300 via the services port (192.11.13.6) interface:
Open your Internet browser.
1.
Create an exception to using proxy servers using the following steps:
2.
• Internet Explorer
a . Select Tools > Internet Options .
b . Click the Connections tab
c . Click the LAN Settings button.
d . If Use a proxy server is already selected, click Advanced.
e . In the Exceptions box, type 192.11.13.6. If there are any existing entries in this box, add to
the list of entries and separate entries with a ";".
f . Click OK to close the Proxy Settings dialog box.
g . Click OK again to close the LAN settings dialog box.
h . Click OK again to close the Internet Options dialog box.
• Netscape
a . Select Edit > Preferences .
b . Under Category, click Advanced .
c . Click Proxies .
d . Click Manual Proxy Configuration .
e . Click View.
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
189