Avaya G700 Installation And Upgrades page 195

5 Upgrading an Existing G700 with an S8300 (Primary Controller or Local Survivable Processor):
6. Locate the customer's .pwd file on your laptop.
When you have selected the .pwd file, click Open in the dialog box.
7.
Click Load File.
8.
When the files are successfully transferred, the system displays the status screen.
9. Check that the Status box displays OK. Then continue with Install the License File.
End
If Necessary, Install License and Authentication Files (from Your Laptop)
Begin
From the S8300 main menu, under the Security heading, select Install License.
1.
The S8300 displays the Install License screen.
Figure 85. Install License Screen
Click the Install new license radio button, then click the Install License button at the
2.
bottom of the screen.
The system tells you the license is installed successfully.
From the S8300 main menu, under the Security heading, select Install Avaya Authentication.
3.
The S8300 displays the Install Avaya Authentication screen.
Figure 86. Install Authentication Screen
Click the Install button.
4.
The system tells you the authentication is installed successfully
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
195