Avaya G700 Installation And Upgrades page 135

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):
Field
Subnet Mask
Gateway Addr
Net Rgn
Close the screen.
3.
End
Add Media Gateways
Begin
When you are logged in to MultiVantage via SAT, you will be able to add G700 Media Gateways
to the system.
!
CAUTION:
Be sure the serial number for the G700 Media Gateway you enter in this procedure matches
exactly the serial number displayed in
entered incorrectly, the serial number will prevent the S8700 Media Server from
communicating with the G700 Media Gateway.
1. At the SAT prompt, type add media-gateway <number>
where <number> is the gateway number from 1 to 250.
The S8700 displays the Media Gateway screen.
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
Conditions/Comments
The subnet mask associated with the IP address for this IP
interface.
For more information on IP addresses and subnetting, see
"Administration for Network Connectivity for Avaya
MultiVantage Software, 555-233-504".
TM
The address of a network node that serves as the default
gateway for the IP interface.
The region number for this IP interface.
"Get the Serial Number of the G700" on page
2 of 2
68. If
135