Avaya G700 Installation And Upgrades page 126

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):
Add Media Gateways
Begin
When you are logged in to MultiVantage via SAT, you will be able to add G700 Media Gateways
to the system.
!
CAUTION:
Be sure the serial number for the G700 Media Gateway you enter in this procedure matches
exactly the serial number displayed in
serial number is case-sensitive, and if entered incorrectly, will prevent the S8300 Media
Server from communicating with the G700 Media Gateway. In this case, the phones won't
work.
At the SAT prompt, type add media-gateway <number>
1.
where <number> is the gateway number from 1 to 9.
The S8300 displays the Media Gateway screen.
Figure 54. Add Media Gateway Screen
Complete the Name field with the hostname assigned to the G700 Media Gateway.
2.
Complete the Identifier field with the serial number of the G700 Media Gateway. You can obtain
3.
the serial number by using the show system Media Gateway Processor CLI command at the
"super" prompt. See
109 for details.
!
CAUTION:
Be sure the serial number for the G700 Media Gateway you enter in this procedure matches
exactly the serial number displayed in
entered incorrectly, the serial number will prevent the S8300 Media Server from
communicating with the G700 Media Gateway.
Complete the Network Region field with the value supplied in the planning documentation.
4.
This number will usually match the region of the S8300, but depending on the location of the
G700 and the type of endpoints connected to it, the region number may differ.
126
"Get the Serial Number of the G700" on page
"Check the Serial Number of the G700 Media Gateway Processor" on page
"Get the Serial Number of the G700" on page
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
68. The
68. If