Install Software On The S8300 - Avaya G700 Installation And Upgrades

5 Upgrading an Existing G700 with an S8300 (Primary Controller or Local Survivable Processor):
1. Log in to the S8300 Web interface (see
page 193).
Choose Upload Files to Server under Miscellaneous on the left pane of the main menu.
2.
The S8300 displays the Upload Files to Server screen.
Figure 88. Upload Files to Server Screen
Click the Browse button for the first field.
3.
The S8300 displays the Choose File window, which allows you to select files from your laptop.
Click directory names until you find the .tar file for the latest S8300 software.
4.
Click the Browse button for the second field.
5.
6. Click directory names until you find the .tar.gz file for the latest MultiVantage Software.
Click Load File.
7.
When the files are successfully transferred, the system displays the status screen.
Check that the Status box displays OK.
8.
End

Install Software on the S8300

Once you have transferred the updated S8300 software file (with a .tar extension) to the S8300 Media
Server, the software is then available to be installed.
Note: You cannot install the MultiVantage Software in the same way.
Install New Software
Begin
Choose Install New Software Release from the left pane of the main menu.
1.
The S8300 displays the Choose Software screen.
200
"Log in to the S8300 Web Interface from Your Laptop" on
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002