Universal Serial Bus (Usb) Modems - Avaya G700 Installation And Upgrades

7 Connecting Telephones and Adjunct Systems:

Universal Serial Bus (USB) Modems

Each S8300 Media Server requires a Universal Serial Bus (USB) modem for maintenance access and to call
out an alarm. An external modem may be connected to the S8300 Media Server through a universal serial
bus (USB) connection, providing dial-up access. The modem requires an analog line to the remote location.
Note: The modem type is not optional and must be the specific modem that is shipped
with the S8300.
To connect the external modem to a USB port on the S8300 Media Server:
1 . Connect one end of the modem's USB cable to an available USB port on the S8300 Media
Server's faceplate. Either USB1 or USB2 can be used.
2 . Connect the other end of the cable to the external modem.
3 . Connect the modem to an analog line.
Note: The modem that is shipped with the S8300 obtains its power from the ISB
interface. There is no power connection.
4 . Verify operation as instructed by the modem's documentation.
254
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
Universal Serial Bus (USB) Modems