Avaya G700 Installation And Upgrades page 151

4 Configuring a New G700 with an S8700 (No Local Survivable Processor):
you will be given the current list of set commands available. If you type:
P330-1(configure)#> set interface help
you will be given a much more restricted list of command possibilities that address the possible
interfaces to be set.
For a complete list of command line interface commands, refer to the "Avaya™ P330 User's Guide".
Determine Necessary Firmware to Install on the G700
Begin
The first steps determine if new firmware for the P330 Stack Processor is necessary.
Login to the Avaya P330 command line interface.
1.
2. At the P330-1(super)# prompt, type configure
At the P330-1(configure)# prompt, type dir
3.
The list of software appears
Figure 65. Directory List for P300 Processor
4. Check the version number of the EW_Archive file to see if it matches the Release Letter. If not,
you must upgrade the P330 Stack Processor.
5. At the P330-1(configure)# prompt, type show image version
The list of software appears.
Figure 66. Show Image Version List for P330 Processor
P330-1(configure)# show image version 3
Mod Module-Type
------ -----------
3 Avaya G700 Media Gateway
3 Avaya G700 Media Gateway
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
.
.
Bank
----
Version
-------
A 0.0.0
B 3.8.2
151