Avaya G700 Installation And Upgrades page 56

2 Installing Hardware for the G700 Media Gateway and S8300 Media Server:
Figure 13. Cabling Multiple Units in a Single Rack
Connect Units within a Single Stack
Begin
1. Connect the light grey connector of the short Avaya X330SC cable (12 in, 30 cm) to the port
marked "to upper unit" in the bottom-most stack element.
Connect the dark grey connector of the same short X330SC cable to the port marked "to the lower
2.
unit" in the unit above.
Repeat until you reach the top element in the stack. Up to ten units can be stacked together.
3.
To implement stack redundancy:
Use the Redundant Cable to connect the port marked "to lower unit" on the bottom element to the
4.
port marked "to upper unit" on the top element of the stack.
End
56
1
cadc2cbl KLC 082202
Installation and Upgrades for the G700 with an S8300/S8700
Cable Multiple Units
2
555-234-100 — Issue 2 — October 2002