Administer Multivantage Software On The S8700 - Avaya G700 Installation And Upgrades

4 Configuring a New G700 with an S8700 (No Local Survivable Processor):
Administer MultiVantage Software on the
S8700
To continue administration of various features available to the S8700 Media Gateway with G700 Media
Gateways, you will use the SAT tools. Among many other tasks, you will use the SAT interface to:
• Provide Ethernet access to MultiVantage Software (this should have already been established as a
part of normal S8700 installation)
• Define the IP Network Region (this should have already been established as a part of normal S8700
installation)
• Add a Media Gateway
This document covers only the administration of MultiVantage Software required for the G700
Media Gateway to communicate with the primary controller over a customer's network. For the
majority of administration required, see ''Administrator's Guide to MultiVantage Software, 555-233-
506,'' or ''Administration for Network Connectivity for MultiVantage Software, 555-233-504.'' For
information on installing the CLAN boards on the S8700 port networks, see ''Installing the Avaya
S8700 Media Server with Avaya MCC1 or SCC1 Media Gateways'' on the ''Avaya S8300 and S8700
Media Server Library CD, 555-233-825.''
Log in to the S8700 MultiVantage SAT Screens
Begin
If you already have a valid Telnet session in progress, access the SAT program by typing sat or
1.
dsat . Go to step 4.
2. If you are not yet logged in, open a telnet program on your computer. For example:
- On a Windows system, go to the Start menu and select Run .
- To log in directly to the SAT program, type telnet <IP address> 5023
Log in to the MultiVantage Software as craft .
3.
Enter your login confirmation information as prompted:
- Password prompt. Type your password in the Password field, and click Login or press Enter
again.
- ASG challenge. If the login is Access Security Gateway (ASG) protected, you will see a
challenge screen. Enter the correct response and click Login or press Enter.
Enter your terminal type. Accept the default value, or enter the appropriate type for your
4.
computer. For example, you may use type ntt, a terminal type available for Windows NT4.0 or
Windows 98. For Windows 2000, use w2ktt.
The SAT interface appears.
5. Enter SAT commands as appropriate.
170
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002