Avaya G700 Installation And Upgrades page 104

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):
Download or copy the keys file
Begin
Longer files may be transferred from the network time server to the S8300 Media Server as follows:
Using either the Download Files to Server screen or the Transfer files using an FTP procedure
1.
to access the keys file listed on your preinstallation worksheet.
In both cases, the file is transferred to the media server's FTP directory.
When finished, click on the Configure Server wizard window to resume server configuration.
2.
3. After the keys.install file is uploaded, select the location where it resides, usually in the
/var/home/ftp subdirectory.
Note: Occasionally services personnel may direct you to use the /tmp directory.
If a keys file is not used, or if the correct keys.install file is already installed, select the option to
4.
not install a new keys file.
End
Set the media server's time now
Begin
In the main main menu under Server, click Set Server Time / Timezone.
1.
The S8300 displays the Set Server Time/Timezone window.
Set the media server's time close enough to the NTS's time, date, and time zone that
2.
synchronization can occur (within about 5 minutes).
When finished, click on the Configure Server wizard window to continue.
3.
After NTP is enabled, time changes greater than 15 minutes will disrupt the synchronization with
the NTS and NTP will shut down. You need to set the server's clock now so that synchronization
can take place.
When finished, click Continue.
4.
End
104
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002