Avaya G700 Installation And Upgrades page 57

2 Installing Hardware for the G700 Media Gateway and S8300 Media Server:
If you have elements of a stack in two racks, you must use the Avaya X330LC cable to connect them. You
may not link more than 10 units to form a stack, but those units can be mounted in more than one rack.
Link Elements in Multiple Racks
Begin
Use the long (6ft, 2 m) Avaya X330LC cable to connect elements in two racks.
1.
2. Connect the Avaya X330LC cable (dark grey connector) to the port on first unit of the stack
marked "to the lower unit."
3. Connect the Avaya X330LC cable (light grey connector) to the port on the last unit in the stack
marked "to the upper unit."
To implement stack redundancy:
Connect the dark grey connector of the black Redundant Cable to the port marked "to lower unit"
4.
on the bottom unit of the stack.
5. Connect the light grey connector of the black Redundancy Cable to the port marked "to upper
unit" on top unit of the stack.
!
CAUTION:
Do not cross-connect two stack elements with two Octaplane (light-colored) cables. If you
wish to cross-connect for redundancy, use a black redundancy cable.
End
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
Cable Multiple Units
57