Avaya G700 Installation And Upgrades page 202

5 Upgrading an Existing G700 with an S8300 (Primary Controller or Local Survivable Processor):
On the Choose License Source screen, click the radio button next to the following:
3.
- I want to reuse the license files from the currently active partition on this
server.
- Do not update authentication information.
!
CAUTION:
If you did not install the authentication and license files and
New License or Authentication Files Installed)" on page
options and follow instructions to select the license and authentication files from the ftp
directory. Failure to do so may cause you to be locked out of the S8300 after the next reboot.
This may force replacement of the S8300.
- I will supply the license/authentication files myself when prompted later in this
process.
- Update authentication information as well as license information.
Click Continue.
4.
The S8300 displays the Begin Installation screen, which summarizes the request you have
made.
Figure 91. Begin Installation Screen
At the Begin Installation screen, click Continue.
5.
The S8300 displays the Install in Progress screen.
202
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
"Run Save Translations (Only If
196, you must select the following