Avaya G700 Installation And Upgrades page 197

5 Upgrading an Existing G700 with an S8300 (Primary Controller or Local Survivable Processor):
Directory. Enter the directory on the corporate repository to which you want to copy the backup
file. When you enter a forward slash (/) in the directory field, the system copies the backup file to
the default directory. The default directory for backup data on the FTP server is /var/home/ftp. If
you do not want to use the default directory, you must enter the path name for the directory.
Click Start Backup.
6.
The system displays the results of your backup procedure on the Backup Now results screen.
Check Link Status
Begin
At the SAT prompt, enter display communication-interface links and press Enter.
1.
Note all administered links.
2.
Type status link number and press Enter for each administered link.
3.
Check the following fields for the values listed:
4.
- Link Status = connected
- Service State = in service
Type list signaling group and press Enter.
5.
Note the signaling groups listed by number.
6.
For each of the signaling groups listed, type status signaling group <number> and press Enter.
7.
If any of the links are not up, make note of any that are down.
8.
Record All Busyouts
Begin
At the SAT prompt, type display errors and press Enter. Look for type 18 errors and record any
1.
trunks that are busied out, so you can return them to their busy-out state after the upgrade.
Disable TTI
Begin
Note: Do this step only if Terminal Translation Initialization (TTI) is enabled.
!
CAUTION:
If you do not disable the TTI, the translations can be corrupted.
At the SAT prompt, type change system-parameters features and press Enter.
1.
2. Scroll to the second page.
Set the Terminal Translation Initialization (TTI) Enabled? field to n and
3.
press Enter to de-activate the TTI feature. If the field is already n, cancel the command.
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
197