Avaya G700 Installation And Upgrades page 69

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):
Complete and Download the License and Authentication Files to Your Laptop
Begin
1. Use Windows File Explorer or another file management program to create a directory on your
laptop for storing license and authentication files (for example, C:\licenses).
Access the Internet from your laptop.
2.
Go to rfa.avaya.com.
3.
Use the System ID or the SAP ID of the customer to locate the license and authentication files for
4.
the customer.
Check that the license and authentication files are complete. You might need to add the serial
5.
number of the customer's G700.
If the files are not complete, complete them.
6.
7. Use the download or email capabilities of the rfa web site to download the license and
authentication files to your laptop.
End
Run the ART Tool for the INADS IP Address
Begin
The ART tool is a software tool that generates an IP address for a customer's INADS alarming
modem. This IP address is required for configuring the S8300's modem for alarming.
Note: You must generate a license and authentication file before you use the ART tool.
Also, the ART process is available only to Avaya personnel. Non-Avaya
personnel must contact their service support or customer care center for INADS
addresses, if required.
Access the ART website on your laptop at the URL: http://spiexp1.cng.avaya.com:8000/cgi-
1.
bin/ART/ARTstart.cgi
Run the ART program and write down the IP address for the customer's INADS line.
2.
End
Download the Latest MultiVantage Update Software
Begin
To install the latest update software for the MultiVantage software that resides on the S8300, you
first download the software file to your laptop. Use the following steps:
1. On your laptop, create a directory to store the file (for example, c:\S8300download).
Connect to the LAN using a browser on your laptop or the customer's PC and access
2.
http://www.avaya.com/support
the laptop.
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
on the Internet to copy the required MultiVantage software file to
69