Load New Software On The S8300 - Avaya G700 Installation And Upgrades

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):
4. Click the Install button.
The system tells you the authentication is installed successfully.
End
Run Save Translations
Begin
!
CAUTION:
This procedure saves the official passwords for the customer's system in the MultiVantage
software. If you fail to perform this step now, you may be irretrievably locked out of the
system later in the installation when the system reboots.
At the prompt in the telnet window, type sat and press
1.
2. Log in again as craft.
At the SAT prompt, type save translations and press
3.
The system displays the message Command successfully completed.
End

Load New Software on the S8300

Although this is a new installation and software already exists on the S8300, there may be new software
loads available that you may need to install. Follow the steps in this section to bring the S8300 to the most
recent load of software.
Determine Necessary Upgrades to the S8300
Begin
Choose View Software Version under Server Configuration and Upgrades on the left
1.
pane of the S8300 main menu.
The S8300 displays the View Software Version screen.
82
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
.
E NT ER
.
E NT ER